Yokogawa FieldMate Bedienungsanleitung PDF herunterladen (Seite 92)

  <ESpecicationsCommontoFieldMateBasicandAdvance>

E-42

IM 01R01A01-01E 9th Edition : May 31, 2013-00

 FOUNDATIONeldbusH1DevicesBlocks

In Parameter Manager, only the TB (transducer block) and resource block are selected to be

displayed/setbydefaultforFOUNDATIONeldbusH1devices.Blocksotherthanthesecanbe

addedintheoptionsettings.Thesesettingsbecomecommondenitionsfordevicesofthesame

type (model).

Morespecically,theread/writepermissioncanbesetforallblocksinadevice.However,only

the write permission is enabled/disabled for the transducer block and resource block. The read

permission is always enabled.

 MIBParametersandBlockTagHeadersofFOUNDATIONeldbusH1

Devices

This function does not support the MIB parameters (NMIB and SMIB parameters) and block

headers(functionblocktags,etc.)ofFOUNDATIONeldbusH1devices.

 FOUNDATIONeldbusH1DeviceMode

WhendownloadingtoanFOUNDATIONeldbusdevice,thedefaultprocessistoautomatically

enter O/S (Out of Service) mode and then switch back to the previous mode after writing

completes. This process can be enabled or disabled with the “Change O/S Mode during

download” setting in the Option settings.

 Categorize Parameters by Class Attribute

Thisfunctionallowstheusertocategorizeanddisplaydeviceparametersbyclassattribute.

This function is applied to all currently displayed blocks and allows the user to display

parameters that have a class attribute in the order of the blocks.

• Thefollowing5tabsaredisplayedforFOUNDATIONeldbusH1devices.

Alarm, Tune, Operate, Service, Diagnostic

• Thefollowing4tabsaredisplayedforHARTdevices.

UPLOAD,MENU,Service,Diagnostic

 Custom Tab

TheCustomtaballowstheusertofreelyassign,acrossFOUNDATIONeldbusH1blocks,alist

of parameters that needs to be monitored on a device type basis.

To add and display items in the Custom tab, select the desired parameters in a window other

than the Custom tab and then select “Send to Custom tab.” To remove parameters from the

Custom tab, select a parameter and click “Delete from Custom tab” on the Custom tab.

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 383 384

Keine Kommentare

Yokogawa FieldMate Bedienungsanleitung Seite 92