Yokogawa DAQWORX Bedienungsanleitung PDF herunterladen (Seite 9)

1-2

IM WX103-01E

• Viewer

You can use the Viewer to (1) display measured and computed data that has been

recorded (saved), (2) read values and perform statistical computation over an area

using cursors, and (3) convert the measured and computed data into various le

formats such as Excel.

• Calibrator

You can use the Calibrator to calibrate the MX100 universal input modules.

Logger

On the Logger, the following screens (windows) are used to enter settings.

• System Screen

On this screen, you can search for MX100s in the same network segment, set

communication parameters of the detected MX100s such as the IP address, select

the MX100s to be connected, select measurement groups (groups that have the same

monitor interval/record interval), and perform other functions.

• Acquisition Screen

You can set the monitor interval of the measured data, the record step of the data,

and the record start/stop conditions. You can also set the save destination and the le

name of the record data, set up the le division function, and perform other functions.

• Channel Setup Screen

For each measurement channel, you can set (1) the measurement conditions such

as the input mode, measurement range, and measurement span, (2) whether to

carry out measurement/recording, and (3) the alarm conditions. You can also set

up computations such as the four arithmetical operations using the measured data

(computation channel setting), set the signal to be output from the digital output

module (DO channel setting), and set up modules such as the analog output and

PWM output modules.

• General Display Settings Window

For each display group, you can set the channels to be displayed, display scale,

display zone, trip point (the value of interest in the waveform display), display color,

and other parameters.

1.1 Functional Overview of MXLOGGER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 162 163

Keine Kommentare

Yokogawa DAQWORX Bedienungsanleitung Seite 9