Yokogawa DAQWORX Bedienungsanleitung PDF herunterladen (Seite 145)

4-1

IM WX103-01E

Index

Calibrator

4.1 Connecting the MX100 Data Acquisition Unit

Notes on Using the Calibration Software

• If another user or another software program is connected to the MX100, drop the

connection before connecting with the Calibration Software.

• If you change the module conguration before connecting with the Calibration

Software, carry out system conguration on the Logger (see section 2.2, “Conguring

the System”).

• When calibrating, do not perform other operations. Use extra c

aution in the operation,

because the module may malfunction if you execute a wrong operation while

calibration is in progress.

Procedure

1. Start the Calibrator.

The Unit Information window opens.

2. In the

IP Address/Host Name box, enter the IP address or host name of the MX100

to be calibrated.

3. Click Connect.

Enter the host name or IP address of the MX100 to be calibrated.

Execute connection

When the connection is established, information about the unit’s module

conguration is displayed. If you click the Check button, the 7-segment LED on the

main module of the connected unit shows the text “—CALL—” owing from right to

left.

To disconnect the connected MX100

To turn on the 7-segment

LED on the connected

MX100 to check which unit

is the one connected

Information about the connected MX100

Modules attached to the

connected MX100 Data

Acquisition Unit

Chapter 4 Calibrator

1 2 ... 140 141 142 143 144 145 146 147 148 149 150 ... 162 163

Keine Kommentare

Yokogawa DAQWORX Bedienungsanleitung Seite 145