Yokogawa DAQWORX Bedienungsanleitung PDF herunterladen (Seite 73)

2-43

IM WX103-01E

Index

Logger

2.8 Analog/PWM Output Settings

Procedure

Setting Analog Output

1. Click Channel to show the Channel setup screen.

2. Click the AO Channel tab.

3. Select the Use check boxes for the AO channels you wish to output.

4. Specify a channel operation of Transmi

ssion Output or User Output 1 through

User Output 4. If user output is specied, you can enter settings in the monitor

screen.

Of all the

AO and PWM channels selected for user output, only one can be specied

for each channel, for a total of four.

5. When Transm

ission Output is specied, enter the reference channel. The

Reference Channel cannot be entered if the channel operation is user output.

Select a range from the Range list box.

7. Click the Mi

n box or Max box under Span and enter the minimum or the maximum

value of the span.

Select the source action

Select the

output range

Transmission output reference channel

Select output or no output

Scroll to set the output action and pattern output

Minimum/Maximum value

setting for the output span

Click here

Click the AO Channel tab.

8. Click the Power ON box under Specied Output and select Hold or Preset Value.

9. Click the Error box under Specied Output and select Hold or Preset Value.

10. If you select Preset Value under

Specied Output, click Preset Value under

operation, and enter the voltage or current.

1. Click the Default

box under Pattern Output and select ON or OFF for the initial

operation in the loop settings.

12.

Click the Type box under

Pattern Output and select Continuous or Ti

mes.

13. If you select Times for Type under Pattern Output, click the Count box under

Pattern Output, and enter the number of loops.

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 162 163

Kommentare zu diesen Handbüchern

Keine Kommentare

Yokogawa DAQWORX Bedienungsanleitung Seite 73

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software Yokogawa DAQWORX