Yokogawa DAQWORX Bedienungsanleitung PDF herunterladen (Seite 74)

2-44

IM WX103-01E

14. Click Edit under Pattern Output to open the Edit Pattern window.

Scroll to select an action or set the reference channel, output range, or span

Set the output value upon startup or error occurrence

Set the default pattern output,

type, and times

Edit pattern button for pattern output

Select the output action upon startup

Select the output action upon errors

15. Edit the output pattern in the Edit Pattern window. For instructions, see “Editing

Patterns” in this section.

Setting PWM Output

1. Click Channel to show the Channel setup screen.

2. Click the PWM Channel tab.

3. Select the Use check boxes for the PWM

channels you wish to output.

4. Specify a channel operation of Transmi

t or User Output 1 through User Output 4.

If user output is specied, you can enter settings in the monitor screen. Of

all the

AO and PWM channels selected for user output, only one can be specied for each

channel, for a total of four.

5. When Transm

it is specied, enter the reference channel. The reference channel

cannot be entered if the channel operation is User Output.

Click the Mi

n box or Max box under Span and enter the minimum or the maximum

value of the span.

Select the source action

Transmission output

reference channel

Select output or no output

Scroll to set the output action and pattern output

Set the minimum/maximum

values for the output span

Click here

Click the PWM Channel tab.

2.8 Analog/PWM Output Settings

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 162 163

Keine Kommentare

Yokogawa DAQWORX Bedienungsanleitung Seite 74