Yokogawa DAQWORX Bedienungsanleitung PDF herunterladen (Seite 146)

6-19

IM WX104-01E

Index

Configuring the DX1000/DX2000

Trend interval [/div]

Select the time corresponding to 1 division of the time axis on the trend display from

below: You cannot specify a trend interval that is faster than the scan interval. See the

table under “Save Interval” below.

15s*, 30s, 1min, 2min, 5min, 10min, 15min, 20min, 30min, 1h,

2h, 4h, and 10h

* Can be set on the DX1002, DX1002N, DX1004, DX1004N, DX2004 and DX2008.

Save Interval (when recording display data)

Select the size of a record data file. The recorded data is divided by the file size

specified here. The available settings vary depending on the Trend interval setting.

Trend interval

Selectable range of

auto save interval

Trend interval

Selectable range of

auto save interval

Trend interval

Selectable range of

auto save interval

*1 Selectable on the DX1002, DX1002N, DX1004, DX1004N, DX2004, and DX2008 (release

number 3 or later).

*2 Selectable in fast sampling mode on the DX1006, DX1006N, DX1012, DX1012N, DX2010,

DX2020, DX2030, DX2040, and DX2048 (release number 3 or later).

5 s*

10 s*

15 s*

30 s 1 min

10 min to 10 min to 10 min to 10 min to 10 min to

12 hours 1 day 3 days 7 days 14 days

2 min 5 min 10 min 15 min 20 min

10 min to 10 min to 10 min to 10 min to 1 hour to

14 days 31 days 31 days 31 days 31 days

30 min 1 h 2 h 4 h 10 h

1 hour to 1 hour to 2 hours to 4 hours to 8 hours to

31 days 31 days 31 days 31 days 31 days

Circular Time Per revolution [/rev]

Select the time of revolution from [20min]* to [4week].

* For release number 2 or earlier, this can only be specified on the DX2004 and DX2008.

For release number 3 and later, this can be specified during the fast sampling mode on the

DX2010, DX2020, DX2030, DX2040 and DX2048 in addition to DX2004 and DX2008.

Circular Save Interval

Select the size of a record data file. The recorded data is divided by the file size

specified here. The available settings vary in the range of [10min] to [31day] depending

on the [Time Per revolution] setting.

Circular Offset Time

The time at the reference position on the circle can be offset in unit of an hour up to 23

hours. The available settings vary depending on the [Time Per revolution] setting.

Display Update 2nd Interval

Enabled when [Trend Rate Switching] is turned [ON] under [Environment] - [Detail

Setting] in the [Basic Setting] tab. Select a rate from the list.

The selectable 2nd intervals are the same as those for Trend interval.

Direction

Set the display direction of the trends to [Horizontal], [Vertical], [Wide], or [Split].

Trend Clear

Settings Description

ON Clears the displayed waveform when the memory sampling is started.

OFF Does not clear the waveform when the memory sampling is started.

This is fixed at [ON] if you are using the multi batch function (/BT2 option; release

number 3 or later). You can set the multi batch function by setting [Batch operation qty]

under [Environment] - [Detail Setting] in the [Basic setting] tab.

6.4 Entering General Settings

1 2 ... 141 142 143 144 145 146 147 148 149 150 151 ... 335 336

Kommentare zu diesen Handbüchern

Keine Kommentare

Yokogawa DAQWORX Bedienungsanleitung Seite 146

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software Yokogawa DAQWORX