Yokogawa DAQWORX Bedienungsanleitung PDF herunterladen (Seite 271)

8-14

IM WX104-01E

[Tuning Setting] Tab

• Tuning Setting (External)

Tuning item ON/OFF

Select [On] for the parameters that you want to display in the tuning window, and [Off]

for other parameters.

Select the ID from the following:

Internal loop

SP (target set point), A1 (alarm 1 setting), A2 (alarm 2 setting)

, A3 (alarm 3 setting),

A4 (alarm 4 setting), P (proportional range), I (integration time), D (differentiation

time), OH (upper output limit), OL (lower output limit), MR (manual reset), H (hysteresis),

DR (control action direction), DB (dead band), PO (preset output), ETC (other items),

BS1 (PV1 input bias), FL1 (PV1 input lter), BS2 (PV2 input bias), FL2 (PV2 input

lter), RT (ratio setting), RBS (remote input bias), RFL (remote input lter), or W01 to

W36 (control computation constant)

External loop

(target set point), A1 (alarm 1 setting), A2 (alarm 2 setting)

, A3 (alarm 3 setting),

A4 (alarm 4 setting: not selectable on the UT320/UT321/UT350/UT351/UT420), P

(proportional range), I (integration time), D (differentiation time), OH (upper output

limit), OL (lower output limit), MR (manual reset), H (hysteresis), DR (control action

direction), DB (dead band), PO (preset output), or ETC (other items)

Note

When [Connecting Model] in the [Basic Setting] tab of [External Loop] is set to [Other], you can

only select [ETC].

Name

Specify the name of the item using a maximum of 6 characters.

Set the register address in the following ranges.

30001 to 339999, 300001 to 365535, 40001 to 49999, and 400001 to 465535.

Span (Point)

Set the parameter decimal point position in the range of 0 to 4.

Span (L)

Set the lower control span value between -30000 to 30000.

Span (U)

Set the upper control span value between -30000 to 30000.

8.3 Control Function Basic Settings

1 2 ... 266 267 268 269 270 271 272 273 274 275 276 ... 335 336

Keine Kommentare

Yokogawa DAQWORX Bedienungsanleitung Seite 271