Yokogawa PC-Based MX100 Bedienungsanleitung PDF herunterladen (Seite 62)

2-48

IM MX180-01E

Trip Point

You can display a trip line to indicate a particular value of interest (trip point) in the

waveform display area. Two trip points (trip 1 is red, trip 2 is blue) can be set on each

waveform. The trip line of the waveform corresponding to the left-most Y-axis is shown in

the waveform display area.

Turn ON the trip

line display

Trip 1 value

Trip 2 value

Trip lineTrip 1 value Trip 2 value

Channel Color

Clicking the channel color displayed in the Color column on the Display setup screen

opens the Color dialog box. You can select the color of each channel using the Color

dialog box. To create custom colors, click the Define Custom Colors button in the Color

dialog box.

Clipping of Waveforms

By default (clip OFF), the waveform is not displayed when the measured/computed value

exceeds the minimum/maximum value of the scale (see the lower left figure). When clip

is turned ON, values that are smaller than the minimum value of the scale are displayed

as the minimum value and the values that are larger than the maximum value of the

scale are displayed as the maximum value.

Clip OFF

Clip ON

Expanding or Reducing the Time Axis on the Waveform Display

On the waveform display, you can click the expand/reduce icon to expand or reduce

the time axis for each waveform display area. The maximum magnification is x20. The

minimum magnification varies depending on the size of the waveform display area.

Magnification

Time axis expand/reduce icon

2.6 Displaying the Monitor and Setting the Display Procedure

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 140 141

Keine Kommentare

Yokogawa PC-Based MX100 Bedienungsanleitung Seite 62