Yokogawa PC-Based MX100 Bedienungsanleitung PDF herunterladen (Seite 60)

2-46

IM MX180-01E

Maximum and Minimum Values of the Y-Axis and the Display Format of the

Scale Values

Specify the maximum and minimum values of the Y-axis scale. The scale values can also

be displayed using logarithmic format as shown below.

Select the exponential format

Selecting the Display Zone of the Waveform

You can select from the following. In the Zone setting on the Display setup screen,

assume the bottom and top edges of the waveform display area to be 0% and 100%,

respectively, and set the waveform display position by specifying the minimum value (0

to 99%) and the maximum value (1 to 100%).

•

User zone

Displays each waveform at the position specified by Zone on the Display setup

screen. A single Y-axis scale of the active waveform can be displayed.

Select user zone

Click the bar to select the active Y-axis scale

Displays the active Y-axis scale

Indicates the active Y-axis

Set the display zone

• Edit zone

Like the user zone, each waveform is displayed at the position specified by Zone on

the Display setup screen. However, you can change the zone on the Monitor screen.

A single Y-axis scale of the active waveform can be displayed.

Select edit zone

Drag the knob to change the minimum/maximum

value of the zone separately

Drag the bar to change the zone position without

changing the zone width

• Full zone

Displays all the waveforms over the full zone of the waveform display area regardless

of the Zone settings on the Display setup screen. A single Y-axis scale of the active

waveform can be displayed.

Select full zone

Waveform display area

(Full zone)

2.6 Displaying the Monitor and Setting the Display Procedure

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 140 141

Keine Kommentare

Yokogawa PC-Based MX100 Bedienungsanleitung Seite 60