<9. General Specications>
9-5
IM 01C25B01-01E
Physical Specications
Wetted Parts Materials
Diaphragm, Cover Flange, Process
Connector, Capsule Gasket, and Vent/Drain
Plug
Refer to “Model and Sufx Code.”
Process Connector Gasket/o-ring
[EJ110, EJ120, EJ430, EJ310]
PTFE Teon
Fluorinated rubber for Option code /N2 and /N3
[EJ130]
Fluorinated rubber (O-ring)
[EJ440]
Fluorinated rubber (O-ring) for C capsule
Glass reinforced Teon (gasket) for D capsule
Non-wetted Parts Materials
Bolting
ASTM-B7 carbon steel, 316L SST stainless
steel, or ASTM grade 660 stainless steel
Housing
Low copper cast aluminum alloy with
polyurethane paint or ASTM CF-8M stainless
steel
Degrees of Protection
IP66/IP67, NEMA TYPE 4X
Cover O-rings
Buna-N, uoro-rubber (option)
Nameplate and tag
316SST (including /N4 wired tag)
Fill Fluid
Silicone, Fluorinated oil (option)
Weight
[Installation code 7, 8, and 9 and wetted parts
material code S for EJ110, EJ310, and
EJ430 (Except for measurement span code
F)]
2.8 kg (6.2 lb) without integral indicator,
mounting bracket, and process connector.
[Installation code 7, 8, and 9 for EJ120]
3.7 kg (8.2 lb) without integral indicator,
mounting bracket, and process connector.
[Installation code 7, 8, and 9 for EJ130]
6.8 kg (14.3 lb) without integral indicator,
mounting bracket, and process connector.
[Installation code 7, 8, and 9 for EJ440]
4.9 kg (10.8 lb) without integral indicator,
mounting bracket, and process connector.
Add 1.5 kg(3.3lb) for amplier housing code 2.
Connections
Refer to “Model and Sufx Code.”
Process Connection of Cover Flange (models
except for EJ440-D): IEC61518
Kommentare zu diesen Handbüchern