Yokogawa Data Acquisition with PID Control CX2000 Bedienungsanleitung PDF herunterladen (Seite 38)

2-26

IM04L41B01-65EN

Network

The“MemoryDataOut”settingisvoidontheDX100P/DX200P.

Setting the TCP/IP

1. Click here (also selectable from [Setting] - [System Mode Setting])

2. Select this tab

Set the IP

address

Enter the timeout value when

turned ON

Set these

addresses

when using

the DNS

DNS setting

You must set the DNS, if you are using a host name to specify the destination server of

the file transfer on an FTP client or the server of the e-mail recipient.

Host Name, Domain Name, Domain Suffix: Up to 64 characters

Keep Alive

This function forcibly drops the connection if there are no responses to the test packets

thataresentperiodically(every30seconds)attheTCPlevel.

Timeout

ThisfunctiondropstheconnectionifnodatatransferisdetectedbetweenthePCandthe

DXP over a predetermined period of time. This applies to data transfer at the application

level only.

To use this function, select [ON] and enter a time period (1 to 120 min).

Communication Input Available User

Specifyauserthatusesthecommunicationinputdata(DX100P:C01toC12,DX200P:

C01toC30)from[Admin1]to[User30],and[Serial](/C2or/C3option).

Serial: The communication input data can be used via the serial communication.

Memory Data Out

Select [Ethernet].

2.6 Configuring the System Mode

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 54 55

Keine Kommentare

Yokogawa Data Acquisition with PID Control CX2000 Bedienungsanleitung Seite 38