Yokogawa Data Acquisition with PID Control CX2000 Bedienungsanleitung PDF herunterladen (Seite 104)

4-10 IM 04L31A01-17E

• Setting the register number of the slave device

20. Use the arrow keys to move the cursor to the [Registers] box.

21. Press the [Input] soft key. An entry box appears.

22. Enter the register number in the entry box.

23. Press the DISP/ENTER key. On the CX1000, select [ENT] and then press the

DISP/ENTER key.

The register number that you entered appears in the [Registers] box.

• Setting the data type assigned to the register of the slave device

24. Use the arrow keys to move the cursor to the [Type] box.

25. Press one of the soft keys from [INT16] to [FLOAT_L] to select the baud rate.

Confirming or Canceling the Settings

26. To confirm the new settings, press the DISP/ENTER key. To cancel the

settings, press the ESC key.

For a detailed procedure in confirming or canceling settings, see “Setup Procedure Using

Operation Keys” on page ix.

Saving the Settings

27. Press the ESC key several times to display the basic setting menu.

28. Press the [End] soft key. A dialog box appears for you to select whether to save

the settings.

29. To save the settings, select [Yes]. To not save the settings, select [No]. To

return to the basic setting menu, select [Cancel]. Then, press the DISP/ENTER

key.

4.3 Setting the Modbus Master Function

1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 320 321

Keine Kommentare

Yokogawa Data Acquisition with PID Control CX2000 Bedienungsanleitung Seite 104