Yokogawa Standalone MW100 Bedienungsanleitung PDF herunterladen (Seite 29)

5.2 MicroLogix 1100

In this example, the system consists of a 1763 MicroLogix 1100, Series A processor and a 1762-IT4 Thermocouple Input

Module residing in the first expansion slot. The MicroLogix 1100’s IP address is 192.168.1.96. The MW100’s IP address is

192.168.001.101. The 1762-IT4 module’s four input channels are sent to the MW100’s Communication Channels C01

thru C04. The 1762-IT4’s channels are configured for ―Engineering Units‖ which will result in an integer value with an

implied decimal point (i.e. 66.8 = 668). The MW100’s Measurement Channels 001 thru 010 are being read and stored in

10 words starting with F8:0.

Data File ―MG10‖ has been created for Message Files. ―Data File RI11 has been created for storing Message Routing

Information.

Configuration of Channel 1

On the Project Tree, under the ―Controller‖ folder, double-click on ―Channel Configuration‖ (or right click and select

―Open‖).

When the ―Channel Configuration‖ dialog box opens, click on the ―Channel 1‖ tab.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 57 58

Keine Kommentare

Yokogawa Standalone MW100 Bedienungsanleitung Seite 29