Yokogawa Standalone MW100 Bedienungsanleitung PDF herunterladen (Seite 27)

2.12. Changing to Measurement Mode

Disconnect the MX118 from the PC before switching to Measurement mode.

1. Turn OFF the power to the MW100.

2. Turn OFF dip switches 1 and 3–7 on the front of the MX118.

Dip switch number 2 is not used for Measurement mode, and is therefore ignored when in

Measurement mode.

Dip switch number 8 is used for the terminator setting. Set as needed.

4. Turn ON the power to the MW100.

When operating in Measurement mode, the MX118’s STATUS LED lights.

3 4 5 6 7 8

When termnator is ON

No. 1： OFF

No. 2： Ignored

No. 3–No. 7： OFF

No. 8： ON

When terminator is OFF

No. 1： OFF

No. 2： Ignored

No. 3–No. 8： OFF

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 39 40

Keine Kommentare

Yokogawa Standalone MW100 Bedienungsanleitung Seite 27